View T315XW01V9_4199848.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 1/25 no reproduction and redistribution allowed document version : 1.5 date : 2006/2/28 product specifications 31.5 wxga color tft-lcd module model name: t315xw01 v9 ( ) preliminary specifications (*) final specifications www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 2/25 no reproduction and redistribution allowed contents interface connections 3-2 color input data refernece 3-5 precautions 9 packing 8 emc 7-2 cover contents record of revisions general description 1 absolute maximum ratings 2 electrical specifications 3 electrical charactreistics 3-1 signal timing specifications 3-3 signal timing waveforms 3-4 power sequence 3-6 optical sfecifications 4 mechanical characteristics 5 reliablity 6 international standards 7 safety 7-1 no www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 3/25 no reproduction and redistribution allowed record of revision version date no old description new description remark 0.1 2005/8/2 all all first issued 1.0 2005/10/12 6 electrical characteristics: tbd electrical characteristics: updated 9 inverter specs : tbd inverter specs : updated 18,19 front and rear drawing add 20 shock : 50g/11ms shock : 100g/2ms updated 1.1 2005/10/17 16 response time : max 20ms response time : max --- updated 1.2 2005/11/30 14 t3 min : 800ms t3 min : 700 or (200)*1 ms updated 1.3 2005/12/2 14 t2 min:50ms, max:100ms t2 min:20ms, max:50ms updated 15 inverter timing inverter timing updated 1.4 2005/12/23 16 luminance variation 9pnt < 1.4 luminance variation 5pnt < 1.3 updated 1.5 2006/2/28 11 timing table add recommend maximum rating updated www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 4/25 no reproduction and redistribution allowed 1. general description this specification applies to the 31.51 inch color tft-lcd module t315xw01 v9. this lcd module has a tft active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 31.51 inch. this module supports 1366x768 xga-wide mode (non-interlace). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. the t315xw01 v9 has been designed to apply the 8-bit 1 channel lvds interface method. it is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. * general information items specification unit note active screen size 31.51 inches display area 697.68 (h) x 392.26(v) mm outline dimension 760.0(h) x 450.0(v) x 47(d) mm with inverter driver element a-si tft active matrix display colors 16.7m colors number of pixels 1366 x 768 pixel pixel pitch 0.51075 mm pixel arrangement rgb vertical stripe display mode normally black surface treatment ag, 3h www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 5/25 no reproduction and redistribution allowed 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause permanent damage to the unit. item symbol min max unit conditions lcd drive voltage vcc -0.3 14.0 [volt] note 1 input voltage of signal vin -0.3 3.6 [volt] note 1 blu input voltage vddb -0.3 27 [volt] note 1 blu brightness control voltage vblon -0.3 5.0 [volt] note 1 operating temperature top 0 +50 [ o c] note 2 operating humidity hop 10 90 [%rh] note 2 storage temperature tst -20 +60 [ o c] note 2 storage humidity hst 10 90 [%rh] note 2 note 1 : duration = 50msec note 2 : maximum wet-bulb should be 39 and no condensation. note 3 :the relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperature must not exceed 39 . www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 6/25 no reproduction and redistribution allowed 3. electrical specification the t315xw01 v9 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second input power for the blu, is to power inverter.. 3-1 electrical characteristics values parameter symbol min typ max unit notes lcd: power supply input voltage vcc 10.8 12 13.2 vdc power supply input current icc - 0.42 0.5 a 1 power consumption pc - 5.0 6.6 watt 1 inrush current i rush - - 2.0 apeak 2 differential input high threshold voltage vth +100 mv 3 differential input low threshold voltage vtl -100 mv 3 lvds interface common input voltage vicm 1.10 1.25 1.40 v input high threshold voltage vih (high) 2.4 3.3 vdc cmos interface input low threshold voltage vil (low) 0 0.7 vdc backlight power consumption pbl 79.8 84 88.2 watt life time 60,000 hours 4 note : 1. vcc=12.0v, = v f 60hz, fclk=81.5mhz , 25 , test pattern : white pattern. 2. duration =470 s m 3. vicm = 1.2v 4. the performance of the lamp in lcm, for example life time or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 7/25 no reproduction and redistribution allowed lamp and the inverter (no lighting, flicker, etc) never occurs. when you confirm it, the lcd assembly should be operated in the same condition as installed in your instrument. 5. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape. 6. the relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperature must not exceed 39 . when operate at low temperatures, the brightness of ccfl will drop and the life time of ccfl will be reduced. vth vcim vtl 0v figure : lvds differential voltage www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 8/25 no reproduction and redistribution allowed 3-2 interface connections lcd panel driving signal connector type and pin assignment are as follows: connector on panel: fi-x30ssl-hf (manufactured by jae) or equivalent mating connector: fi-30c2l (manufactured by jae) or equivalent pin no symbol description default 1 vcc +12v, dc, regulated 2 vcc +12v, dc, regulated 3 vcc +12v, dc, regulated 4 vcc +12v, dc, regulated 5 gnd ground and signal return 6 gnd ground and signal return 7 gnd ground and signal return 8 gnd ground and signal return 9 lvds option low/open for normal (ns), high for jeida ns mode 10 reserved open or high auo internal test 11 gnd ground and signal return for lvds 12 rxin0- lvds channel 0 negative 13 rxin0+ lvds channel 0 positive 14 gnd ground and signal return for lvds 15 rxin1- lvds channel 1 negative 16 rxin1+ lvds channel 1 positive 17 gnd ground and signal return for lvds 18 rxin2- lvds channel 2 negative 19 rxin2+ lvds channel 2 positive 20 gnd ground and signal return for lvds 21 rxclkin- lvds clock negative 22 rxclkin+ lvds clock positive 23 gnd ground and signal return for lvds 24 rxin3- lvds channel 3 negative 25 rxin3+ lvds channel 3 positive 26 gnd ground and signal return for lvds 27 reserved open or high auo internal test 28 reserved open or high auo internal test 29 gnd ground and signal return 30 gnd ground and signal return www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 9/25 no reproduction and redistribution allowed lvds option = high b4 na de de b4 b5 b6 b7 na b5 r2 r7 g2 g2 r2 r3 r4 r5 r6 r3 g3 b2 b3 b3 g3 g4 g5 g6 g6 g4 previous cycle current cycle next cycle clock rin0+ rin0- rin1+ rin1- rin2+ rin2- r0 b1 na na r0 r1 g0 g1 b0 r1 rin3+ rin3- lvds option = low or open b2 na de de b2 b3 b4 b5 na b4 r0 r5 g0 g0 r0 r1 r2 r3 r4 r1 g1 b0 b1 b1 g1 g2 g3 g4 g5 g2 previous cycle current cycle next cycle clock rin0+ rin0- rin1+ rin1- rin2+ rin2- r6 b7 na na r6 r7 g6 g7 b6 r7 rin3+ rin3- www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 10/25 no reproduction and redistribution allowed backlight connector pin configuration - electrical specification mintypmax input voltage---22.824.026.4vdc input current vddb=24v 3.33.53.7adc 1 input power vddb=24v 79.88488w 1 inrush current vddb=24v ------(6.0)adc2 output frequencyvddb=24v64.066.068.0khz onvddb=24v2.0---3.3 offvddb=24v0.0---0.8 on/off control currentvddb=24v0.0---1.5madc maxvddb=24v---3--- minvddb=24v---0.0--- dimming control currenti_vdimminvddb=24v------1.5madc max---2.0---3.3 min---0.0---0.8 external pwm control current---------1.5madc external pwm duty ratio---20---100% external pwm frequency---120180.0300hz dimming control voltagevdim on/off control voltagevdc vblon vdc external pwm control voltagepdimvdc itemsymbol vddb iddb pddb irush i_vblon note d_pdim f_pdim spec unit condition i_pdim fbl note 1 : vdim/open = 1.6v; pdim = open/high; ta=25 5 , turn on for 45minutes note 2 : duration = 20 ms; input specification cn1: jst jst phr-14 pin no symbol description 1 vddb operating voltage supply, +24v dc regulated 2 vddb operating voltage supply, +24v dc regulated 3 vddb operating voltage supply, +24v dc regulated 4 vddb operating voltage supply, +24v dc regulated 5 vddb operating voltage supply, +24v dc regulated 6 blgnd ground and current return 7 blgnd ground and current return 8 blgnd ground and current return 9 blgnd ground and current return 10 blgnd ground and current return 11 vdim gnd: 80%; open/1.6v: 100%; high (3.3v) 120%, luminance 12 vblon bl on-off: open/high (3.3v) for bl on as default 13 pdim external pwm/analog dimming control input; open/high (3.3v, 100% duty) for 100% 14 pdim selection gnd: external pwm dimming in pin13; open/high: analog dimming in pin13. www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 11/25 no reproduction and redistribution allowed 3-3 signal timing specifications this is the signal timing required at the input of the user connector. all of the interface signal timing should be satisfied with the following specifications for it s proper operation. timing table (de only mode) 1.) display position is specific by the rise of de signal only. horizontal display position is specified by the falling edge of 1 st dclk right after the rise of enab, is displayed on the left edge of the screen. vertical display position is specified by the rise of de after a low level period equivalent to eight times of horizontal period. the 1 st data corresponding to one horizontal line after the rise the of enab is displayed at the top line of screen. 3.) if a period of deb high is less than 1366 dclk or less than 768 lines, the rest of the screen displays black. 4.) the display position does not fit to the screen if a period of de high and the effective data period do not synchronize with each other. signal item symbol min type max 50hz 60hz unit period tv 784 1015 789~822 789~822 th active tdisp (v) th blanking tblk (v) 16 247 21~54 21~54 th period th 1414 2000 1414~1722 1414~1722 tclk active tdisp (h) tclk blanking tblk (h) 48 634 48~356 48~356 tclk period clk 18.18 ns frequency freq 55 88 55~88 55~88 mhz horizntal frequency frequencyhs39.455339.45~41.147.34~49.32khz hz frequencyvs4448~5258~62 66 vertical section horizontal section clock vertical frequency recommend for waterfall function ok 1366 1366 768 768 www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 12/25 no reproduction and redistribution allowed 3-4 signal timing waveforms t h t d i s p ( v ) t v d e r g b d a t a 7 6 8 l i n e i n v a l i d d a t a i n v a l i d d a t a 1 l i n e 2 l i n e 3 l i n e 7 6 8 l i n e 4 l i n e t c l k c l k d e r g b d a t a p i x e l 1 3 6 6 i n v a l i d d a t a p i x e l 1 p i x e l 2 p i x e l 3 p i x e l 4 p i x e l 5 p i x e l 6 p i x e l 1 3 6 6 i n v a l i d d a t a p i x e l 1 p i x e l 2 t h t d i s p ( h ) www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 13/25 no reproduction and redistribution allowed 3-5 color input data reference the brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ------- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 14/25 no reproduction and redistribution allowed 3-6 power sequence t1 t2 t3t4 t5t6t7 power supply for lcd v cc (+12v) interface signal (lvds data & clk) gnd gnd valid data 90% 10% 10%10% 10%10% 90% backlight on/off control signal (vblon) values parameter min. typ. max. units t1 470 - 1000 us t2 20 - 50 ms t3 700 or (200)*1 - - ms t4 200 - - ms t5 50 - - ms t6 0.47 - 30 ms t7 1 - - s *1: if t3=200ms, input black signal till 700ms from system is necessary. in case of t3<200ms, the abnormal display will be happened. but it will not damage timing controller. note: the timing controller will not be damaged in case of tv set ac input power suddenly shut down. once power reset, it should follow power sequence as spec. definition. (1) apply the lamp voltage within the lcd operation range. when the back-light turns on before the lcd operation or the lcd turns off before the back-light turns off, the display may momentarily become abnormal screen. www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 15/25 no reproduction and redistribution allowed power sequence for inverter 90% 24v(typ.) 90% power input for backlight 10% vddb t1t2t4 enable back light on/off (vblon) t3 dimming control signal vdim vddb v ddb (typ) v t5 deep condition for inverter values parameter min. typ. max. units t1 20 - - ms t2 500 - - ms t3 0 - - ms t4 1 - - ms t5 - - 10 ms www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 16/25 no reproduction and redistribution allowed 4. optical specification optical characteristics are determined after the unit has been on and stable for approximately 45 minutes in a dark environment at 25 . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig.1 1 presents additional information concerning the measurement equipment and method. values parameter symbol min. typ. max. units notes contrast ratio cr 650 800 1 surface luminance, white lwh 400 500 cd/ O 2 luminance variation white 5 p 1.30 3 rise time tr r 8 ms response time decay time tr d 8 ms 4 gray to gray color coordinates red r x 0.640 r y 0.330 green g x 0.270 g y 0.600 blue b x 0.150 b y 0.060 white w x 0.280 w y typ.-0.03 0.290 typ.+0.03 viewing angle x axis, right( =0 ) r 85 degree 5 x axis, left( =180 ) l 85 y axis, up( =90 ) u 85 y axis, down ( =0 ) d 85 www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 17/25 no reproduction and redistribution allowed 1 2 5 4 3 h v / 2 h/2 v h/6 v/6 note : 1. contrast ratio (cr) is defined mathematically as: surface luminance of l on1 contrast ratio= surface luminance of l off1 2. surface luminance is luminance value at point 1 across the lcd surface 50cm from the surface with all pixels displaying white. from more information see fig 2. when vddb = 24v, iddb = 5a. l wh =lon1 where lon1 is the luminance with all pixels displaying white at center 1 location. 3. the variation in surface luminance, white is defined (center of screen) as: white(5p) = maximum(l on1 , l on1 , l on3 , l on4 ,l on5 )/ minimum(l on1 , l on2 , l on3 , l on4 ,l on5 ) 4. response time is the time required for the display to transfer between any two gray level(average) for additional information see fig3. (ton:15ms typ. toff :5ms typ.) 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig4. fig. 2 luminance www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 18/25 no reproduction and redistribution allowed fig.3 response time the response time is defined as the following figure and shall be measured by switching the input signal for any level of gray(bright) and any level of gray(dark) . any level of gray(bright) any level of gray(dark) any level of gray(bright) tr r l0,15,l31, .l255 l0,15,l31, .l255 p h o t o d e t e c t o r o u t p u t time l0,15,l31, .l255 fig.4 viewing angle www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 19/25 no reproduction and redistribution allowed 5. mechanical characteristics the contents provide general mechanical characteristics for the model t315xw01 v9 . in addition the figures in the next page are detailed mechanical drawing of the lcd. horizontal 760.0mm vertical 450.0mm outline dimension depth 45mm horizontal 703.6mm bezel opening vertical 398.3mm horizontal 697.68mm active display area vertical 392.26mm weight 7200g typ. surface treatment ag, 3h www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 20/25 no reproduction and redistribution allowed front view www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 21/25 no reproduction and redistribution allowed rear view www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 22/25 no reproduction and redistribution allowed 6. reliability environment test condition no test item condition 1 high temperature storage test ta=60 240h 2 low temperature storage test ta=-20 240h 3 high temperature operation test ta=50 80%rh 240h 4 low temperature operation test ta=0 240h 5 vibration test (non-operating) wave form: random vibration level : 1.0g rms bandwidth : 10-500hz duration: x, y, z 20min one time each direction 6 shock test (non-operating) shock level: 100g waveform: half since wave, 2ms direction: x, y, z one time each direction 7 vibration test (with carton) random vibration:10~200hz,1.5g,30minute s in each x,y,z direction 8 drop test (with carton) height: 53.3cm 1 corner, 3 edges, 6 surfaces (astmd4169-i) www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 23/25 no reproduction and redistribution allowed 7. international standard 7-1. safety (1) ul1950 third edition, underwriters laboratories, inc. jan. 28, 1995 standard for safety of information technology equipment including electrical business equipment. (2) can/csa c22.2 no. 950-95/60950 third edition, canadian standards association, standard for safety of information technology equipment including electrical business equipment. (3) en60950 : 1992+a2: 1993+a2: 1993+c3: 1995+a4: 1997+a11: 1997 iec 950: 1991+a1: 1992+a2: 1993+c3: 1995+a4:1996 european committee for electrotechnical standardization (cenelec) european standard for safety of information technology equipment including electrical business equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committee on radio interference. c) en 55022 limits and methods of measurement of radio interface characteristics of information technology equipment. european committee for electrotechnical standardization. (cenelec), 1998 www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 24/25 no reproduction and redistribution allowed 8. packing label : 83mm * 23mm carton label : 80mm * 40mm carton no: customer no: made in taiwan model no: t315xw01 vx *pm100-01a1600001* qty: 3 part no: 9731t01.xxx au o ptronics www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 25/25 no reproduction and redistribution allowed carton : 3pcs modules 947(l)mm * 290(w)mm * 595(h)mm www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 26/25 no reproduction and redistribution allowed 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage: v= 200mv(over and under shoot voltage) (2) response time depends on the temperature. (in lower temperature, it becomes longer..) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time (required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interface. www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. january, 2003 all rights reserved. t315xw01 v9 - specs. ver 1.5 27/25 no reproduction and redistribution allowed 9-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don t touch interface pin directly. 9-4 precautions for strong light exposure strong light exposure causes degradation of polarizer and color filter. 9-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-6 handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of flue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T315XW01V9

	To Download T315XW01V9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .